Easily and securely install your Easy Mount Grab Bar horizontally, vertically, or diagonally thanks to Healthcraft’s proprietary 9-hole flange design. Easy Mount grab bars are easier to install and offer more flexibility compared to standard 3-hole designs. For installations where wall studs are not accessible, consider using Easy Mount Hollow Wall Anchors, which allow secure attachment without the need for studs. To install the Easy Mount Grab Bar, follow these steps: Choose the Installation Location: Choose a spot that provides optimal support, such as near the toilet, in the shower, or along a hallway. Ensure the location allows for horizontal, vertical, or diagonal mounting, depending on your preference. Locate Wall Studs: Use a stud finder to identify the position of wall studs in the chosen area. Mark the stud locations with a pencil. Position the Grab Bar: Hold the grab bar against the wall at the desired height and orientation. Align the mounting flanges over the marked stud locations. Mark Drill Holes: Using the 9-hole flanges as templates, mark the positions for the drill holes on the wall. Drill Pilot Holes: Drill pilot holes at the marked positions to facilitate screw insertion. Mount the Grab Bar: Align the grab bar’s flanges with the pilot holes. Secure the grab bar to the wall studs using appropriate screws, ensuring a tight and stable fit. Attach Flange Covers: Slide the flange covers over the mounting flanges to conceal the screws and achieve a clean finish. Verify Stability: Test the grab bar by applying pressure to ensure it is securely installed and provides the necessary support.
